RNJLP - Low Profile Rack & Panel Connectors
|
|
|
PRESENTATION The RNJLP rack and panel connectors are designed to connect electrical devices between a moving unit (rack) and a fixed unit (panel). The locking of the mating pair is ensured by the mechanical device of the rack. These connectors with realignment capability were designed for harsh environment, with a low profile design allowing a short distance between the two panels. This is a big benefit for the systems where space is an issue. |
|
|
MAIN FEATURES - Realignment capability : mechanical device ensures axial (+/-1mm), angular (+/-6°) and longitudinal (0.5 mm) realignments (See figure 1) - Many insert patterns : all available Amphenol Mil-DTL-38999 III inserts - Large contacts range : M39029 contacts compatible with Mil-DTL-38999 III 22D, 20, 16, 12, 8, 4 (contact cavities for signal, coaxial, twinax, power contacts) - EMI shielding : grounding fingers ensure shielding before contact mating - Low profile and high density : till 128 size 22D contacts in a 25 shell size - Shell sizes range : 8 shell sizes from 11 to 25 - Temperature range : - 65°C for olive drab cadmium - 200°C for electroless nickel - High durability : 500 cycles minimum - High corrosion resistance : Olive drab cadmium (500 hours salt spray) or electroless nickel (48 hours salt spray) - Low tooling investment : numerous tools common with Mil-DTL-38999 series III connector ones - Light weight Aluminium alloy shells. For the plug : 20% weight saving versus standard RNJ version - Environmental rear membrane protected by a cap on the plug, interfacial seal on male insert. - Sealing reinforced membrane on the fl oating plug ensures high pressure resistance (plug withstands 1000mBars on the rear face, 2000mBars on the front face) - Rear accessory possibility fully compatible with all M-85049 backshells for Mil-DTL-38999 series III - Contacts protection 100% scoop proof design |
|
|
DOCUMENTATION  Download datasheet [2522,43 Ko]
|
3D   See 3D Files
|
Access to solutions