Solutions - Board Level
 |
Receptacles with Stand-off |
| Square flange and jam nut receptacles equipped with PC tail contacts and stand-off. This device allows to fix directly the connector to the board with 3 or 4 screws. This feature avoids the use of fastening device during the soldering process and ensures a perfect grounding between the shell of the connector and the ground of the board. It prevents any mechanical stress on the contacts' terminations during the life of the equipment and increases the reliability and the resistance to shocks and vibrations. |
 |
Very High Density Inserts |
| Amphenol Socapex has developed a full range of High Density inserts to fit in any MIL-DTL-38999 shell types (LJT, JT, TV, CTV) or derivates (RNJ, RNJLP, PP39, SC39…). These inserts allow a contact density increase up to 45% versus a standard MIL-DTL-38999 insert, by using size 23 MIL qualified contacts (M39029/47-314 and M39029/33-264). Contacts with PC-tails are also available. |
 |
Signal and Power Contacts |
| Amphenol's expertise in interconnection solutions insures the proper mateability and performance of the contacts, whether they are standard signal or power, crimp or PCB, as well as wire wrap or solder. Thermocouple contacts are also available. |
 |
High Frequency Contacts |
| Amphenol offer a wide range of high frequency contacts for RF, LAN, data bus and coax/triax/twinax transmission. Coaxial contacts are available in sizes 16, 12 and 8. Triax and twinax contacts are available in sizes 12 and 8. Those high frequency contacts are available in crimp and PCB versions, with a large variety of PC-tails. |
 |
Quadrax and Differential Twinax Contacts |
| Amphenol quadrax and differential twinax contacts are available for use in MIL-DTL-38999 connectors and derivates. These size 8 contacts can be used for a frequency range of up to 3 Gigahertz and are 100Ω, 110Ω and 150Ω matched impedance contacts. Quadrax and differential twinax are available in crimp and PC-tail versions. |
Access to showcase